IEEE 2021 International Workshop on Metrology for Industry 4.0 & IoT

IEEE MetroInd 2021

General Track  14 PRESENTATIONS
GENERAL TRACK

Metrological characterization of a low-cost electroencephalograph for wearable neural interfaces in industry 4.0 applications
  • Antonio Esposito
LoRa-Based Sensor Node Energy Consumption with Data Compression
  • Olli Väänänen
State of Health Prediction of Lithium-ion Batteries
  • Emil Petkovski
IOT data-driven experimental process optimisation for kevlar fiberglass components for aeronautic
  • Giuseppe Mastandrea
Design of a Soft Growing Robot as a Practical Example of Cyber–Physical Measurement Systems
  • Annarita Tedesco
Missing data imputation in meteorological datasets with the GAIN method
  • Marina Popolizio
Metrological Characterization of Measurement Systems through Monte Carlo Simulations, Design of Experiments and Robotic Manipulation
  • Davide Maria Fabris
Microfluidic arena for high-throughput C. elegans calcium imaging experiments with multiple strain confinement
  • Enrico Lanza
A WAMS emulation framework for the characterization of measurement algorithms on electrical transmission networks
  • Annalisa Liccardo
Towards large-scale calibrations: a statistical analysis on 100 digital 3-axis MEMS accelerometers
  • Andrea Prato
NO2 photoacoustic sensing system based on resonant cell and UV-LED sensor
  • Enza Panzardi
Quasi-Real Time Remote Video Surveillance Unit for LoRaWAN-based Image Transmission
  • Alessandro Pozzebon
A Dynamic Uncertainty Protocol for Digital Sensor Networks
  • Michael Gaitan
Condition Monitoring with LoRaWAN: Preliminary Tests on Gas Turbine Exciters
  • Gabriele Di Renzone

Special Session  6 PRESENTATIONS
APPLICATIONS OF FIBER OPTIC SENSORS IN INDUSTRY 4.0

Temperature Monitoring by Fiber Bragg Gratings during Microwave Ablation of Ex Vivo Organs for Heat Sink Effect Assessment
  • Elena De Vita
SiC and Diamond Membrane Based Pressure Sensors for Harsh Environments
  • Andrea Orsini
Feasibility assessment of an FBG-based soft sensor embedded into a single-use surgical mask for respiratory monitoring
  • Daniela Lo Presti
FBG-based System for Loss of Resistance Detection During Epidural Injections
  • Francesca De Tommasi
Unobtrusive monitoring of the respiratory rate in an office desk chair with FBG sensors
  • Cátia Leitão
FBGs in 3D printed objects monitoring
  • Pasquale Di Palma

Special Session  4 PRESENTATIONS
CYBERSECURITY STANDARDS AND TECHNOLOGIES FOR IOT AND INDUSTRY 4.0 (SECURITYSTANDARDS)

Securing the metrological chain in IoT environments: an architectural framework
  • Giovanni Paolo Sellitto
Soft Computing Optimization of Stealth Data Loss Attack to Industrial Control Systems
  • Philippe Ciampi
Testing and selecting lightweight pseudo-random number generators for IoT devices
  • Augusto Parisot
Towards a Practical Information Security Maturity Evaluation Method focused on People, Process and Technology
  • Fernando Costa

Special Session  8 PRESENTATIONS
WEARABLE SENSORS AND DEVICES FOR UNOBTRUSIVE PHYSIOLOGICAL MONITORING

Metrological Characterization of a new textile sensor for temperature measurements and a comparison with a Pt100 sensor
  • Giorgia Mazzini
Wearable system for elbow angles estimation based on a polymer encapsulated conductive textile
  • Joshua Di Tocco
Wearable Sensor based on Fiber Bragg Grating with Flexible Polymer for Squat Exercise
  • Dongjoo Shin
An accurate and stable bed-based ballistocardiogram measurement and analysis system
  • Federico Cocconcelli
Single beat ECG-based Identification System: development and robustness test in different working conditions
  • Riccardo Sorvillo
Respiratory Rate Estimation During Walking/Running Activities Using Principal Components Estimated from Signals Recorded by a Smart Garment Embedding Piezoresistive Sensors
  • Luigi Raiano
An undershirt for monitoring of multi-lead ECG and respiration wave signals
  • Enrico Picariello
Smart Mattress Based on Fiber Bragg Grating Sensors for Respiratory Monitoring: A Feasibility Test
  • Francesca De Tommasi

Special Session  5 PRESENTATIONS
GENDER-INSPIRED APPROACHES TO THE DESIGN OF INNOVATIVE MEASUREMENT SYSTEMS AND IOT APPLICATIONS

User-driven design and monitoring systems of limb prostheses: overview on the technology and on the gender-related aspects
  • Yumeng Yao
Chroma. A bioinspired medical solution for pregnancy care
  • Carla Langella
Fighting maternal bleeding in low-resource settings: an analysis of design and measurement issues
  • Sara Candidori
Preliminary analysis on the cervicothoracic angular velocity during forward bending and backward return task
  • Davide Paloschi
A 3D printed human skin phantom made of multifunctional nanocomposites for the assessment of RF treatments effect
  • Luca Melillo

Special Session  9 PRESENTATIONS
INDUSTRY 4.0 AND IOT FOR THE HOSPITAL OF THE FUTURE

An adaptation of Pareto's parametric distribution as a support tool for the analysis of maintenance costs of biomedical equipment
  • Vittorio Puntoni
Instrumented crutches with audio feedback to alter assisted gait
  • Marco Ghidelli
Forecasting hospital performances using a hybrid ETS-ARIMA algorithm
  • Martina Andellini
Doppler Flow phantom Stability Assessment through STFT Technique in Medical PW Doppler: a preliminary study
  • Fabio Fuiano
Cloxy - An Economical and Scalable SPO2 Tracking System
  • Asuman Kolbaşı
Structural integrity monitoring of the endoscopes working channels: a visual inspection approach
  • Maria Stella Ricci
A novel experimental set-up for Young Modulus Assessment through Transit Time measurements in Biomedical applications
  • Fabio Fuiano
A vest for treating jaundice in low-resource settings
  • Leandro Pecchia
Intraoperative-technologies advancements in automated cancer detection: a narrative review
  • Giulia Fransvea

Special Session  11 PRESENTATIONS
AI-ENHANCED SENSING FOR INDUSTRIAL AND MEDICAL IOT APPLICATIONS

A Low Channel Number Sensing Approach for an Ethnic Specific Labour Immanency Prediction using Bio-Electromagnetism
  • Ejay Nsugbe
A Machine Learning-based Approach for Advanced Monitoring of Automated Equipment for the Entertainment Industry
  • Marco Canil
Image sensors and VPU acceleration for data analysis and classification
  • Lorenzo Petrosino
Edge computing optimization method. Analyzed task: crowd counting
  • Alessandro Graziosi
Heart Rate Analysis through Smartphone Camera
  • Anna Sabatini
A Machine Learning-Based Voice Analysis for the Detection of Dysphagia Biomarkers
  • Valerio Cesarini
A Comparative Analysis on the Impact of Linear and Non-Linear Filtering Techniques on EMG Signal Quality of Transhumeral Amputees
  • Yazan Jarrah
A Deep Learning based Model for Decoding Motion Intent of Traumatic Brain Injured Patients’ using HDsEMG Recordings
  • Mojisola Grace Asogbon
A Novel Synchronous Hybrid Steady-State Brain-Computer Interface Based on Visual and Auditory Integration
  • Jun Xie
NMF Based System for Speaker Identification
  • Valerio Cesarini
A New Multilabel System for Automatic Music Emotion Recognition
  • Fabio Paolizzo

Special Session  7 PRESENTATIONS
METROLOGY FOR DATA INTEROPERABILITY IN INDUSTRY 4.0

Considerations about quantities, units, and dimensions for interoperability
  • Blair Hall
Interoperable processes and infrastructure for the digital transformation of the quality infrastructure
  • Anke Keidel
Benefits of network effects and interoperability for the digital calibration certificate management
  • Juho Nummiluikki
Semantics in Sensor Networks: An Ontology for Dynamic Transfer Behavior in Calibrated Sensors
  • Anupam Prasad Vedurmudi
SmartCom - Key Findings for Digitalisation in Metrology
  • Wiebke Heeren
Decreasing the implementation costs of smart metering systems with interoperability
  • Jovan Vujasinovic
Metrological Data Completeness for Digital Transformation
  • Mark J. Kuster

Special Session  7 PRESENTATIONS
INTELLIGENCE IN INFRASTRUCTURES

CNN-LSTM Neural Network Applied for Thermal Infrared Underground Water Leakage
  • Antonio Panarese
Technological Platform for Hydrogeological Risk Computation and Water Leakage Detection based on a Convolutional Neural Network
  • Antonio Panarese
Intelligent Inspection of Railways Infrastructure and Risks Estimation by Artificial Intelligence Applied on Noninvasive Diagnostic Systems
  • Annamaria Saponaro
Railway Components Wear: a Smart Platform for Full Traceability of Maintenance Activities
  • Alessandro Massaro
Intelligent Quarry Production Monitoring Risks and Quality by Artificial Intelligence
  • Annamaria Saponaro
Thermal IR and GPR UAV and Vehicle Embedded Sensor Non-Invasive Systems for Road and Bridge Inspections
  • Alessandro Massaro
A Non-Intrusive Load Identification System Based on Frequency Response Analysis
  • Simone Mari

Special Session  5 PRESENTATIONS
SYSTEMS AND METHODS OF IOT-ENABLED HEALTH MONITORING FOR THE WELL-BEING ASSESSMENT OF OPERATOR AND PATIENT 4.0

2D ECG Image Based Biometric Identification Using Stacked Autoencoders
  • Mohamed Benouis
AI-based sensor network for ADLs monitoring on ageing people during COVID-19 epidemic
  • Sara Casaccia
Baropodometric analysis in different feet positions: reliability and repeatability evaluation
  • Luca Molinaro
Two-dimensional temperature feedback control strategy for thermal ablation of biological tissue
  • Leonardo Bianchi
Learning classifiers for analysis of Blood Volume Pulse signals in IoT-enabled systems
  • Angelica Poli

Special Session  6 PRESENTATIONS
SENSORS AND TECHNIQUES FOR SPORT AND PHYSICAL ACTIVITY

Ballistic skills assessment in semi-professional football players through inertial sensors: the effects of COVID-19 forced rest period
  • Luigi Truppa
SISTINE: Sensorized Socks for Telemonitoring of Vascular Disease Patients
  • Leandro Lucangeli
Step count accuracy and precision of the Xiaomi Mi Smart Band 5 in healthy young individuals
  • Alessio Bellini
The rationale behind the Technogym Functional Threshold Power test
  • Andrea Nicolò
Entrainment between music and breathing during cycling exercise: a pilot study
  • Lorenzo Innocenti
Polymer-encapsulated flexible strain sensors to monitor scapular movement: a pilot study
  • Arianna Carnevale

Special Session  4 PRESENTATIONS
SENSORS IN SMART OBJECTS FOR IOT DEVICES IN INDUSTRY 4.0

An Integrated Platform of Smart Objects Supporting the Quality of Life of Frail People
  • Salvatore Castorina
Preliminary Analysis on a Paper-based Ammonia Sensor for Future Food Smart Packaging
  • Edoardo Cantù
Batteryless Wireless Temperature/Humidity Sensor for Item-level Smart Pharma Packaging
  • Carolina Miozzi
Preliminary Study on Wireless Passive Resistive Sensor Applied for Smart Objects
  • Michela Borghetti

Special Session  4 PRESENTATIONS
WIRELESS SOLUTIONS FOR IOT-BASED MEASUREMENTS OVER WIDE AREAS

A real-time MCU-based wireless system for remote monitoring of PV devices
  • Martina Radicioni
Turning old into new: adding LoRaWAN connectivity to PLC in brownfield installations
  • Paolo Ferrari
Adaptive LoRaWAN Transmission exploiting Reinforcement Learning: the Industrial Case
  • Paolo Ferrari
IoT framework with flexible management of multi-protocol nodes for redundancy applications
  • Rafael Cunha

Special Session  5 PRESENTATIONS
TEMPERATURE AND VIBRATION MEASUREMENTS FOR CONDITION-BASED MAINTENANCE OF MACHINERIES

Vibration Signals for Condition Based Maintenance of Hydraulic Valves
  • Fabio Conti
Turbomolecular high-vacuum pump bearings diagnostics using temperature and vibration measurements
  • Alessandro Paolo Daga
Vibration Analysis for Condition Monitoring of an Automatic Press Machine for Thermoplastic Polymers
  • Chiara Conese
A Case Study on Challenges of Applying Machine Learning for Predictive Drill Bit Sharpness Estimation
  • Umut Onus
Characterization of a 6 Degrees of Freedom Parallel Robot
  • Mattia Camnasio

Special Session  5 PRESENTATIONS
MEASUREMENT SYSTEMS IN THE INDUSTRIAL IOT ERA

Impact of Usage Profiles on Remaining Useful Life and Post-Prognostic Maintenance Decisions
  • Roberto Bodo
Towards fixtureless robotic in-line measurement assisted assembly, a case study
  • Victor Azamfirei
An Unsupervised TinyML Approach Applied for Pavement Anomalies Detection Under the Internet of Intelligent Vehicles
  • Pedro Henrique Meira de Andrade
MSensorMob: A Multi-Sensors Hardware Framework to Support the Development of Adaptable Monitoring Units in Mobile Applications
  • Pedro Henrique Meira de Andrade
RFID based Predictive Maintenance System for Chemical Industry
  • Simone Nappi

Special Session  7 PRESENTATIONS
MEASUREMENTS AND SENSORS FOR SAFETY AND WELLNESS OF WORKERS

Radar-Based Monitoring of the Worker Activities by Exploiting Range-Doppler and Micro-Doppler Signatures
  • Emanuele Cardillo
Initial evaluation of a portable ultrasound exposimeter for occupational health monitoring
  • Michal Cieslak
Analysis of Physiological Parameters and Workload during Working Tasks in COVID-19 Pandemic Conditions
  • Christian Tamantini
Architecture of a Wireless Wearable Body Area Sensor Network for Work Risk Assessment
  • Stefano Di Modica
A clustering-based approach for quality level verification of sanitation procedures in workplaces
  • Francesca Santucci
Respiratory rate monitoring of video terminal operators based on fiber optic technology
  • Daniela Lo Presti
Enhancing joint torque estimation of the workers using 3D body models
  • Teodorico Caporaso

Special Session  8 PRESENTATIONS
ZERO DEFECT MANUFACTURING

The ROBxTASK architecture for interoperability of robotic systems
  • Georg Weichhart
Industrial Data Services for Quality Control in Smart Manufacturing – the i4Q Framework
  • Anastasios Karakostas
Deep learning for zero-defect inkjet-printing of electronics
  • Sebastian Zambal
Multi-tenant Data Management in Collaborative Zero Defect Manufacturing
  • Francisco Fraile
Smart Digital Twin for ZDM-based job-shop scheduling
  • Julio César Serrano Ruiz
Big Data Provision for Digital Twins in Industry 4.0 Logistics Processes
  • Paulo Figueiras
Towards Zero Defect Manufacturing: probabilistic model for quality control effectiveness
  • Elisa Verna
Failure prediction through a model-driven machine learning method
  • Amirreza Baghbanpourasl

Special Session  9 PRESENTATIONS
MEASUREMENTS AND VIRTUAL MEASUREMENTS FOR INDUSTRY 4.0: APPROACHES AND SOLUTIONS FOR SMART MANUFACTURING

Vision system for optical quality control of components made by fibre thermoplastic-based composites
  • Emanuela Natale
Ensemble of artificial neural networks to control the induction soldering of spacecraft’s waveguide paths
  • Anton Milov
Machine Learning based Prediction Method of Pollution Concentration in the Atmosphere
  • Kseniya Salakhutdinova
Assembly Error-mating Measurement and Compensation Method for Machining Production Line
  • Hariyanto Gunawan
Development of Eddy Current Sensor for Measuring Thickness of Copper Wafer in sub-Micron Scale
  • Eungchul Kim
Edge-enabled cloud computing management platform for smart manufacturing
  • Janpu Hou
Managing the sampling rate variability of digital MEMS accelerometers in dynamic calibration
  • Giulio D'Emilia
Dimensional measurements in production line: a comparison between a custom-made telecentric optical profilometer and on-the-market measurement systems
  • Alessia Baleani
Enhancing Object Detection Performance Through Sensor Pose Definition with Bayesian Optimization
  • Loris Roveda

Special Session  4 PRESENTATIONS
ADDITIVE MANUFACTURING FOR INDUSTRY 4.0

Microwave characterization of Polyamide 6 Graphene Nanoplatelet Composites
  • Erika Pittella
FEM deformation analysis of a transtibial prosthesis fed with gait analysis data: A preliminary step towards restoring proprioception in amputees
  • Francesco Castelli Gattinara Di Zubiena
Reproducibility and Embedding Effects on Static Performace of 3D Printed Strain Gauges
  • Ilaria Mileti
Uncertainty assessment techniques for selective laser melting process control
  • Gennaro Salvatore Ponticelli

Special Session  4 PRESENTATIONS
RAPID PROTOTYPING OF SMART INDUSTRIAL IOT SOLUTIONS

Non-Invasive Air-Writing Using Deep Neural Network
  • Matteo Perotto
Preliminary study of an innovative method to increase the accuracy in direct 3D-Printing of NURBS objects
  • Francesco Demarco
Preventing COVID-19 contagion in industrial environments through anonymous contact tracing
  • Luca Santoro
Damage Detection in Structural Health Monitoring with Spiking Neural Networks
  • Luca Zanatta